puregloss doors

PAN0039-Web-Graphic Puregloss-Colour 1020x100 - Copy (2)


Puregloss Doors

Puregloss is our range of Ultra High Gloss doors and panels, offering a highly sophisticated yet totally practical finish.

Puregloss doors are made from melamine with a UV cured high gloss resin on the surface to form a mirror gloss finish that is exceptionally hard and scratch-resistant. Puregloss doors are manufactured from an 18mm Moisture-Resistant E-Zero (low formaldehyde) MDF substrate and edged with a 1mm gloss PVC edge. Both the surface of the board and the edging comes with a plastic film for protection. The back side of the board is always the matching colour in a matt finish. All doors and drawer fronts are clashed on all 4 edges. Matching panels may be edged on either 1, 2, 3 or 4 edges.
10 Year Guarantee Icon 55x55 18mm Thick Icon 55x55 Low Emission MDF Icon 55x55 Moisture Resistant MDF Icon 55x55 NZ Made Icon 55x55 Protective Film Icon 55x55 Scratch Resistant Icon 55x55 UV Protected Icon 55x55
btn viewgallery btn caremaintenance
Substrate Moisture Resistant E0 MDF Technical Spec Sheet
Available Thicknesses 18mm Technical Product Catalogue
Minimum Height 100mm Puregloss Brochure
Minimum Width 150mm  

Puregloss Colour Selection

Puregloss Snowdrift Black PG  

btn enquire

Care & Maintenance

Puregloss Doors are made from High Moisture-Resistant E-Zero MDF substrate, but as with any MDF product, are not waterproof. Care should be taken to ensure they are not exposed to high levels of heat, moisture, steam and humidity and that any accidental spills are wiped up immediately.

For cleaning we recommend wiping with a soft, damp cloth with warm soapy water and then drying with a soft dry cloth. For more difficult marks, a mild streak-free glass cleaner may be used.
Do not use commercial cleaning products, abrasive papers, solvents, thinners or any other strong cleaners to clean Puregloss doors. Use of these cleaners will void your 10 year warranty.


Puregloss doors and panels are manufactured with a protective film on the surface to prevent scratching. This film should not be removed until installation is complete.
About Panelform

Panelform is the supplier of the most complete range of kitchen doors, panels and components to the kitchen and joinery industries in New Zealand. Our dedication to...

Read More
Find a Retailer

To find out where to order our doors, or to find a Panelform display at a kitchen showroom near you, click here. We will respond within 4 hours Mon-Fri, 7am to 5pm.