stylelite doors

PAN0039-Web-Graphic StyleLite-Colour 1020x100
StyleLite Arctic


StyleLite Doors


Panelform StyleLite Acrylic doors are a very popular choice for perfect gloss and silky smooth matt finishes in New Zealand. 

Created in 18mm acrylic-faced E0 MR MDF board with a 1mm edge, StyleLite acrylic doors and panels are not only easy-care and durable, but are also one of the few repairable surfaces on the market. They are highly resistant to heat and moisture. StyleLite Acrylic is available with ZeroLine laser edging in some colours as shown below. Colours that are not available in ZeroLine will have the 1mm edge applied with a PUR glue, which is almost seamless and creates a much stronger glue bond than traditional edgebanding glues. As more 'laser' edge colours become available for StyleLite, more colours will be available with our ZeroLine edging. Watch this space!

 
10 Year Guarantee Icon 55x55 18mm Thick Icon 55x55 Easy Clean Icon 55x55 Low Emission MDF Icon 55x55 Moisture Resistant MDF Icon 55x55 UV Protected Icon 55x55 Laser Edged Icon 55x55 Protective Film Icon 55x55


btn enquire
 

StyleLite ZeroLine Colours

Arctic Gloss Alabaster Gloss      
 

StyleLite Colours

Black Gloss Silver Gloss Graphite Gloss    
Arctic Velvet Alabaster Velvet Black Velvet    
 
ZeroLine Logo - 150x58

ZeroLine is the newest technology to come to kitchen door manufacturing.

Often called 'laser edge', ZeroLine technology enables the 1mm edge tape to be 'fused' to the edge of the door or panel without using glue, creating an almost invisible join that is exceptionally strong and highly water resistant.

ZeroLine uses specially manufactured PP or ABS edge tapes which are more environmentally friendly than traditional PVC tapes.
 
Before:
PVC Edging-977-230
Traditional glued edging
 
After:
Zeroline Edging-482-761
ZeroLine glueless edging
 
 
 
 
 
SPECIFICATIONS
 
DOWNLOADS
Substrate E0 Moisture Resistant (MR) MDF Technical Spec Sheet
Available Thicknesses 18mm Technical Product Catalogue
Minimum Height 50mm  
Minimum Width 50mm  
Maximum Height 2400mm  
Maximum Width 1200mm  
 

Care & Maintenance

Stylelite doors are made from 18mm acrylic-faced E0 MR MDF board, but as with any MDF product, are not waterproof. Care should be taken to ensure they are not exposed to high levels of heat, moisture, steam and humidity and that any accidental spills are wiped up immediately.

The Stylelite surface becomes more scratch resistant over the first few days after the removal of the protective film. This process can be accelerated by lightly polishing the Stylelite surface immediately after the film is removed using Novus No. 1 or Plexus plastic polishes with a clean microfibre cloth.

Please Note: The repair advice below applies only to Stylelite High Gloss products.

General Cleaning: Apply Novus No. 1 Plastic Polish, Plexus Plastic Polish or warm soapy water and wipe using a clean microfibre, soft cloth or damp chamois.
Removing Marks and Light Scratches: Apply Novus No. 2 or a good quality liquid polish and using a damp, clean microfibre or soft cloth, polish in a circular pattern. Then remove polish using the general cleaning procedure above.
Removing Heavier Scratches: Apply Novus No. 3 or a good quality fine compound polish and using a damp, clean microfibre or soft cloth, polish in back and forth motion at right angles to visible scratches. Then use Removing Marks and Light Scratches procedure, then General Cleaning procedure above.

Ensure all polish residues are removed completely from the Stylelite surface. Low speed electric buffing can also be used to repair marks and scratches.

Do not:
  • Use a paper towel to clean.
  • Dry wipe doors and panels at any time.
  • Use brushes, scourers or scrapers on doors and panels.
  • Use abrasive cleaners, thinners or methylated spirits.
Doing any of these will void your 10 year warranty.
 

Installation

StyleLite acrylic doors and panels are manufactured with a protective film on the surface to prevent scratching. This film should not be removed until installation is complete.
 

btn enquire

 

 

About Panelform

Panelform is the supplier of the most complete range of kitchen doors, panels and components to the kitchen and joinery industries in New Zealand. Our dedication to...

Read More
Find a Retailer

To find out where to order our doors, or to find a Panelform display at a kitchen showroom near you, click here. We will respond within 4 hours Mon-Fri, 7am to 5pm.

 

Lara Allison in Christchurch, NZ on Houzz
Contact Us
Christchurch 03 982 1195
Hours: 7am - 5pm, Mon to Fri
Auckland 09 320 0340
By appointment only
sales@panelform.co.nz